Shield RMSc footprint standard

18 de fevereiro de 2025

Que miras de ponto vermelho poderá montar na montagem com footprint RMSc ou Shield RMSc? Poderá instalar a Sig Sauer Romeo Zero na mesma placa que a Shield RMSc? Cobrimos a compatibilidade completa do footprint Shield RMSc neste artigo.

Compatibilidade de footprint explicada

O que significa "footprint"? O termo footprint refere-se à estrutura dos encaixes e dos furos para parafusos na base do dispositivo ótico.

E o que significa se os footprints forem compatíveis?

Cada mira ótica tem alguma base para montagem. A base consiste em pinos em várias posições e furos para parafusos usados para fixação da mira às montagens. Se duas miras utilizarem a mesma base para montagem, dizemos que partilham o mesmo footprint.

Neste artigo mostramos quais as miras de ponto vermelho que partilham o mesmo footprint.

Padrão de footprint Shield RMSc

O footprint Shield RMSc consiste em quatro encaixes nos cantos da mira e em dois furos para parafusos na parte traseira da mira.

Tanto os encaixes dianteiros como os traseiros estão afastados 17mm / 0.66 inches entre si. Dos encaixes traseiros aos dianteiros, a distância é de 32,8mm / 1.29 inches. A posição destes quatro encaixes corresponde à posição dos pinos que estão na superfície de montagem de qualquer montagem para esta norma.

Os furos para parafusos estão posicionados na parte traseira do dispositivo ótico. Servem para a fixação da mira às montagens. Estes dois furos para parafusos estão afastados 14mm / 0.55 inches entre si.

Os parafusos a utilizar nestes furos para parafusos estão sempre incluídos na embalagem com a mira.

Miras de ponto vermelho compatíveis

O footprint RMSc é partilhado por muitos outros fabricantes no mercado.

Abaixo pode encontrar a lista completa de miras de ponto vermelho que funcionarão com o footprint Shield RMSc.

Vector Optics Frenzy-S 1x17x24 MOS Multi Reticle mira de ponto vermelho

(3)

€189,00 EUR

Em stock

Ver detalhes
Osight SE [vermelho]

(4)

€239,95 EUR

Em stock

Ver detalhes
Osight K

(1)

€189,95 EUR

Em stock

Ver detalhes
Vector Optics Frenzy-S 1x17x24 MIC

(2)

€139,00 EUR

Em stock

Ver detalhes
Sightmark Mini Shot A-Spec M3 Micro Reflex Sight mira de ponto vermelho

(2)

€144,99 EUR

Em stock

Ver detalhes
Esgotado

Vortex Defender CCW

(2)

€320,00 EUR

Ver detalhes
Osight SE [verde] | 6 MOA

(3)

€239,95 EUR

Em stock

Ver detalhes
Osight S

€299,95 EUR

Em stock

Ver detalhes

Como montar uma mira de ponto vermelho com footprint Shield RMSc

Depende do dispositivo em que a quer montar.

Vai instalá-la numa montagem Picatinny? Ou seja, arma equipada com trilho Picatinny? Então precisa de procurar uma montagem Picatinny com footprint Shield RMSc.
Ou vai montá-la numa pistola? E a pistola será Optics Ready (com a corrediça da pistola cortada para red dot)? Então precisa de procurar uma montagem para mira de ponto vermelho com footprint Shield RMSc.
Ou será uma pistola standard sem esse corte? Então precisa de procurar uma placa adaptadora com footprint Shield RMSc.

Outros padrões de footprint

Existem muitas bases diferentes para miras de ponto vermelho, mas as outras mais comuns são as seguintes:

Great experience

Great experience. Fantastic service after the sale.

Beretta PX4 [incl. Storm & Storm Inox] red dot mount | type A [RMSc, DPP, Docter footprint]

Plaque pour Vector Frenzy/Shadow2

Ma Cde a été traité très rapidement et je l’ai reçue tout aussi rapidement. Vous êtes au TOP. La plaque est pour un Vector Frenzy SCRD-79 monté sur Shadow 2.
Très bien,
SF

CZ Shadow 2 Optics Ready plate | Trijicon RMR footprint

Plate was a exact fit for the Beretta apx A1

Plate was a exact fit for the Beretta apx A1. Took a couple minutes to determine which screws to should use. 5 star rating

Beretta [APX A1 & APX RDO] Optics Ready plate | type F [RMSc, DPP, Docter footprint]

very good replacement sight for my jerico

very good replacement sight for my jerico. Need to be file a bit to fit in the slot.

Tanfoglio [Force, Combat & Compact], EAA Witness, IWI Jericho adjustable rear sight | white dots

Perfect fit

Perfect fit,

CZ Shadow 2 Optics Ready plate | Shield RMSc & Holosun K-series footprint

Fits perfectly, fiber rods are very bright,

Fits perfectly, fiber rods are very bright, installation easy

Springfield [XD,XDM] & HS Produkt [XDM, HS-9, SF19] adjustable sights | fiber optic

Great value for money

Great value for money and a big improvement from the early osight models.

Great!

They work great! Much better than factory!

Ruger P91 - P97 adjustable sights | fiber optic

Beware of thread locker - great experience

Installed this on my 92xi. Great product, however there is far too much solid thread locker on the bolts from the factory. So much so that both bolt heads snapped off during assembly. The only reason I am rating five stars is because Optics Spot support was incredibly helpful and prompt in resolving the issue on Beretta's behalf. Thank you Optics Spot. If not for the support staff I would be very unhappy, such an oversight is unacceptable from a premium brand.

Beretta [92X, 92XI, 92 GTS, 92X RDO, M9A4] Optics Ready plate | Trijicon RMR footprint

Much better plate and screws then Beretta's offering.

The customer service was exceptional in helping me decide which company to order this plate from. Beretta answered my call, but had no solution for their inferior, soft screws. After 500 years I would think they could have solved such an easy problem, The plate arrived a few days earlier then originally scheduled. The plate fit the Beretta APX A1 RDO perfectly. The plate was rugged and the screws supplied were much better then the soft junk screws that Beretta supplies with their plate.

Beretta [APX A1 & APX RDO] Optics Ready plate | Shield RMSc footprint

Super Sights

Hat bei mir die werkseitigen Suppressor-Height-Sights ersetzt, die waren mir zu hoch. Jetzt zusammen mit dem Frenzy SRCD-82 für mich perfektes Zielbild. Verpackung war nur ein Tütchen statt OVP, etwas seltsam. Sonst aber alles ok, bin super zufrieden. Danke Optics Spot:)

CZ P-10 Optics Ready low sights | fiber optic

Fits after filing

A genuine, high-quality product. The rear sight mount is too wide. I had to have it professionally filed down. After filing, it fits the rear sight. After that, installing the collimator is a simple matter. The communication with the store is excellent. We reached a fantastic agreement. Thank you very much for the good and friendly communication. I recommend this store and the products it offers.

1911 [Rail Gun Cut] red dot mount | Trijicon RMR footprint

Optic mount for PPQ M2

Fit like a glove

Walther [PPQ, P99, Creed, PPX & PPS] red dot mount | type S [RMSc, DPP, K-series footprint]

Perfect fit and great

Perfect fit and great quality

Ich bin sehr zufrieden mit dem Osight C

Ich bin sehr zufrieden mit dem Osight C. Das Absehen ist klar und superschnell im Ziel. Der Lieferumfang ist super. Passende Schrauben für alle möglichen Montageplatten sind dabei. Ich habe jetzt 2 Pistolen mit der Optik ausgestattet plus die zugehörigen Wechselsysteme. Für meinen S&W 686 plane ich das ebenso. Die Augen erkennen Kimme und Korn nicht mehr so gut. Die Gleitsichtbrille macht es nicht leichter. Mit dem Osight C bin ich wieder treffsicher im Ziel. Nun macht mir Kurzwaffe auch wieder Spaß.

Excellent product at a great price.

The plate is perfect, solid, and fits perfectly with the OR slide of the CZ Shadow 2. Unlike the same item produced by a well-known Italian manufacturer, it does not require dots to be inserted for coupling with the red dot because they are already part of the structure. The price is also significantly more competitive and shipping times are also reasonable.

CZ Shadow 2 Optics Ready plate | Leupold DPP footprint

Perfect fit, solid mount

Perfect fit, solid mount. Easy to work with

1911 .22 LR [GSG Cut] red dot mount | Shield RMSc footprint

Worked

Worked perfectly

Bul Sas II [UR & SL] red dot mount | type B [RMR & RTS footprint]

Mit Osight C ist jeder Schuss in der mitte

Ich bin sehr zu frieden und sieht auch noch sehr schön aus pass perfekt zur meine Waffe

CZ Target

Plate worked great so far. You’ll probably need an angled shim to zero in your red dot. Seems to be common with CZ.

CZ TS 2, CZ Shadow 2 Target red dot mount | Trijicon RMR footprint

Sro mount

This mounts is as described. Came with all the screws needed to mount on the slide and to mount the optic. Took about 2 weeks to get to me after submitting the order. Was shipped from the Netherlands. There were no additional fees ( tariff, customs or tax) up arrival.